Vibratory Bowl Drives for Vibratory Parts Feeder Bowls
Vibratory Bowl Drives LPS - 9,12 15, 18, 22 & 24 | Vibratory Bowl Drive CC-7 | Vibratory Bowl Drives S.Q. 30, 36
VIBRATORY BOWL DRIVE
LPS - 9, 12, 15, 18, 22 & 24
Application
Vibratory Bowl Drives, designed by Vibromatic. We have always had a reputation for innovative design, which is best demonstrated in our Vibratory Bowl Drive Unit featuring excellent appearance, reduced installation time, and ease of maintenance. Other features which make our vibratory drive units unique to the vibratory part handling industry is our positive feet locators, and a balanced electro-magnetic powered top member.
Our Solid State control will interface with any size vibratory drive unit for a well tuned drive package. When one of our vibratory drive units either CW or CCW, have been properly tuned you can expect years of dependable service.
|
DIA |
LPS-9 |
LPS-12 |
LPS-15 |
LPS-18 |
LPS-22 |
LPS-24 |
|
A |
95 |
9.5 |
9.5 |
9.5 |
11.25 |
11.25 |
|
B |
9 |
12 |
15 |
18 |
22 |
24 |
|
C |
|
|
|
1/2-20 |
|
|
|
D |
10 |
13 |
16 |
19 |
26 |
26 |
|
E |
1.12 |
1.12 |
1.12 |
1.75 |
1.75 |
1.75 |
|
F |
.38 |
.38 |
.38 |
.38 |
|
|
|
G |
3/8-24 |
3/8-24 |
3/8-24 |
5/8-18 |
5/8-18 |
5/8-18 |
|
WT |
|
102 |
145 |
222 |
|
|
> Click Here For Printable Drawing  pdf file 107kb
VIBRATORY BOWL DRIVE CC-7
Application
The CC Vibratory Drive Unit has been specially designed to handle extremley high loads with added dependability. This vibratory drive unit offers excellent appearance, reduced installation time, ease of maintenance, and built-in leveling and height adjustment. Other features which make our unit unique to the part handling industry are our positive feet locators and a balanced electro-magnetic powered top member.
Our Solid State control will interface with any size drive unit for a well tuned drive package. When one of our vibratory drive units either CW or CCW, have been properly tuned you can expect years of dependable service.
Our reputation for innovative design and engineering is once again demonstrated in the (CC) Vibratory Drive Unit.
FEATURES
- (1) Coil Drive.
- Bi-Directional Machining.
- Composite Springs.
- In-Line Connectors on Coils.
- Single Cord from Drive Unit to Controller.
|
Item # |
# RQ |
Description |
|
CC-701 |
1 |
Upper Member Casting |
|
CC-702 |
1 |
5/16-24x1 3/4" SHCS Bowl Fastener |
|
CC-703 |
1 |
Center Hold Down Washer |
|
CC-704 |
1 |
Lower Member Burn-Out |
|
CC-706 |
4 |
1/4-28x1" SHCS Coil Fastener |
|
CC-707 |
4 |
1/4 T-Slot Washer |
|
CC-708 |
4 |
Armature Assembly |
|
CC-709 |
8 |
10-32x1 1/4" SHCS Armature Fastener |
|
CC-710 |
8 |
5/16-24x1 1/4" Hdn. Hwx Hd. Spring Fastener |
|
CC-712 |
|
1/8" Composite Spring |
|
CC-713 |
|
3/16" Composite Spring |
|
CC-714 |
|
1/4" Composite Spring |
|
CC-715 |
4 |
Spring Clamp Block |
|
CC-716 |
|
Spring Spacer |
|
Item # |
# RQ |
Description |
|
CC-717 |
4 |
V1-40 Rubber Foot |
|
CC-719 |
4 |
1/2-20x3 Jack Screw |
|
CC-720 |
8 |
1/2-20 Jam Nut |
|
CC-721 |
4 |
1/4-28x3/4" Rubber Foot Fastener |
|
CC-724 |
1 |
2 Meter Cord w/Female Plug |
|
CC-725 |
2 |
10-32x1/2" SHCS Quad Box Fastener |
|
CC-726 |
1 |
Rubber Grommet Cord Holder |
|
CC-728 |
3 |
40 Dur. Rubber Foot w/3/4" 1/4-20 Studs |
|
CC-729 |
3 |
1/4" T-Slot Washer |
|
CC-730 |
3 |
1/4" Lock Washer |
|
CC-731 |
3 |
1/4" Hex Nut |
|
CC-732 |
2 |
1 3/4" Dis. x 1 1/4" Counterweight |
|
CC-733 |
2 |
5/16" T-Slot Washer |
|
CC-734 |
2 |
5/16-24x1 3/4" SHCS Weight Fastener |
|
CC-735 |
1 |
Acorn Nut for Bowl Mount |
> Click Here For Printable Drawing pdf file 104kb
VIBRATORY  BOWL DRIVE S.Q. 30, 36
Application
The heavy duty SQ Vibratory Drive Unit has been specially designed to handle extremely high loads with added dependability. This vibratory unit follows the same guide line of the smaller units, such as excellent appearance, reduced installation time, and ease of maintenance. Other features which make our unit unique to the vibratory part handling industry are our positive feet locators and a balanced electro-magnetic powered top member.
Our Solid State control will interface with any size vibratory drive unit for a well tuned drive package. When one of our vibratory drive units either CW or CCW, have been properly tuned you can expect years of dependable service.
The SQ series vibratory drive untis are machined welded. Another unique feature of the QD drive unit is the ability to interchange CW with CCW components. For more information contact your Vibromatic Representative.
|
Part # |
# RQ. |
Description |
|
SQ-3201 |
1 |
Upper Weldment |
|
SQ-3202 |
4 |
5/8-18x1 1/2" Hex Hd. Bowl Fast |
|
SQ-2203 |
4 |
Clamp Nut |
|
SQ-2204 |
1 |
Lower Weldment |
|
J-120V |
2 |
FCI-Coil |
|
SQ-2206 |
4 |
3/8-24x1 1/4" SHCS Coil Fastner |
|
SQ-2207 |
6 |
1/2-20x3/4" Soc. Set Screw Coil Adj. |
|
SQ-2208 |
2 |
Armature |
|
SQ-2209 |
8 |
7/8-14x2 3/4" Hex Hs. Spring Fast Hard |
|
SQ-2210 |
|
1/8" Drive Spring |
|
SQ-2211 |
|
3/16" Drive Spring |
|
SQ-2212 |
|
1/4" Drive Spring |
|
SQ-2213 |
|
5/16" Drive Spring |
|
SQ-2214 |
|
3/8" Drive Spring |
|
SQ-2215 |
8 |
Spring Clamp Block |
|
SQ-2216 |
|
Spring Spacer |
|
SQ-2217 |
4 |
V3-40 Rubber Foot |
|
SQ-2218 |
4 |
1/2-20x1" Rubber Foot Fast. |
|
SQ-2219 |
4 |
1 1/4"-12x8" Jack Screw |
|
SQ-2220 |
8 |
1 1/4"-12" Jam Nut |
|
SQ-2223 |
2 |
333 Cord Clamp |
|
SQ-2224 |
1 |
10-32x5/8" Button Hd. Soc. Cap Screw Cord Clamp Fast |
|
SQ-2225 |
1 |
No. 10 Flat Washer |
> Click Here For Printable Drawing pdf file 92kb
Request a Quote...
Troubleshooting and other technical information | 